Strona domowa
LAKIERNICTWO INDUSTRIAL PODŁOGI BUDOWNICTWO SZKUTNICTWO KAMIENIARSTWO  

Suprawax / Fine Look

Hard oil-wax Suprawax Fine Look is a one-component product for impregnation and coating purposes, based on natural vegetable oils and waxes. It is used for protecting wooden floors inside buildings. The product is chemically resistant and creates a transparent, satin-polish on the surface.

 

Use:

The product is intended for the protective coating of surfaces, with varying levels of intensity of use. It can be applied to parquets, floorboards, mosaic floor, industrial floor, parquet made of solid wood, including floors made of exotic wood.

 

Surface preparation:

The surface should be sanded with a drum sander using sandpaper with a grain-size 36-100. Cover slots and cracks with a filler. Next, sand the surface with a drum sander using 100-grain-size sandpaper and with a disk grinder with a 120-graded mesh. The substrate intended for oil coating must be dry, free from dust and other contaminants. Do not wipe with damp cloth prior to oil coating.

 

Application conditions:

Room, floor and varnish temperature should range between 17° and 25°C.

Relative air humidity: 50-70%.

 

Procedure:

Prior to oil application, wait for the product to reach room temperature, then shake vigorously to mix the contents thoroughly. Apply the oil-wax with a stainless steel trowel, oil brush or mop. Distribute the product evenly, and avoid local accumulation of product. Apply 2 layers of product.

After applying the first layer, wait for 15 minutes and polish the surface with a disk grinder using a white polishing pad. The time interval between the application of the next coating should range between 2 and 4 hours. Apply the second layer of coating, following the procedure described above, but wait for 30 minutes before performing the final polishing work.

The floor can be used after 24 hours from the completion of the works. The surface may be covered (with a carpet, for instance) after one week.

To renew old oil layers, it is recommended to grind the surface with 120-graded mesh, apply the oil coating on the surface and polish it with a white polishing pad.

  polish | deutch | russian

created by gammanet | site credits