The colouring oil-wax Suprawax White Look is a one-component product for impregnation and coating purposes, based on natural vegetable oils, waxes and pigments. It is used for the protective coating of wooden floors in building interiors. The product provides excellent penetration and wood impregnation ability, while simultaneously retaining colour for a long time. The product retains the high parameters of the used floor surface.

Use:

The product is intended for wood whitening, in particular whitening of the annual rings, when coating wooden floors with oil. It can be applied to parquets, floorboards, mosaic floor, industrial floor and parquet made of solid wood.

Surface preparation:

The surface should be sanded with a drum sander using sandpaper with grain-size 36-100. Fill slots and cracks with a filler. Next, sand the surface with a drum sander using 100-grain-size sandpaper and with a disk grinder with 120-graded mesh. The substrate intended for oil coating must be dry, free from dust and other contaminants. When grinding the surface, avoid grinding for too long in one place. Do not wipe with a damp cloth prior to oil coating.

Application conditions:

Room, floor and varnish temperature should range between 17° and 25°C.

Relative air humidity: 50-70%.

Procedure:

Prior to oil application, wait for the product to reach room temperature, then shake vigorously to mix the contents thoroughly. Apply the oil-wax with a stainless steel trowel, oil brush or mop. Distribute the product evenly; avoid local accumulation of the product. Apply 1 or 2 layers of oil-wax, depending on the desired colour intensity.

After applying the layer, wait for 15 minutes and polish the surface with a disk grinder using a white polishing pad. The time interval between the application of the next coating should be more than 6 hours.

The floor surface coating, depending on the desired whitening effect, should be made with the hard transparent product SUPRAWAX FINE LOOK or SUPRAWAX WHITE LOOK.

The floor can be used after 24 hours from the completion of the works. The surface may be covered (with a carpet, for instance) after one week. To maintain the coating of SUPRAWAX WHITE LOOK, use the specialist product SUPRACLEAN 700.